Archive for May, 2008
Window Treatment Inovations Funding
Window Treatment Inovations Funding
Among the projects selected for funding are:
Advanced Processing Technology of Electrochromic Windows: A process to develop new film patterning techniques for energy-saving smart windows. The process improves visible light transmission and reduces glare, while retaining a clear view and increasing thermal comfort. Also, encouraging innovation with window window coverings and shades to help increase energy savings.
An Indirect Route for Ethanol Production: A process to develop fuel ethanol from renewable resources to achieve savings of 80 percent in energy consumption. The process helps U.S. farmers create a market for corn supplies and increases national energy security.
Manufacturing Ceramic Products from Fiberglass Waste: A low-cost energy method of completely transforming fiberglass waste into a dense ceramic product that can be used for window window treatments, shades, as well as other uses. The process could eliminate the need for disposal of 260,000 tons of fiberglass waste annually.
Near-Infrared (NIR) Veneer Strength Sensor for Forest Industry: Use of NIR sensors instead of ultra-sonic technology allows testing for veneer wood strength before drying. The NIR technology will improve process efficiency and reduce product waste, and is expected to save about $23,000 annually in energy costs.
The Force Modulator: A durable sheet metal technology for the steel industry that allows proper control of press forces during part forming.
Popularity: unranked [?]
How To Stop Panic Attacks intelligence p….
How To Stop Panic Attacks intelligence presented by people schooled in How To Stop the protein power lifeplan Panic Attacks ideas
.
Popularity: unranked [?]
Keep it Brief
Keep it Brief
Keep thecover letter brief, usually no more than three to five paragraphs on one page.
Popularity: unranked [?]
Best Natural Solutions for Sinus Infections
Sinusitis (commonly known as a sinus infection) is inflammation, either bacterial, viral, allergic or autoimmune, of the paranasal sinuses.
Signs of Sinus Infections
It can be acute (going on less than three weeks) or chronic (going on more than three weeks). Sinusitis is one of the most common complications of the common cold. Sinus Infection symptoms include: Headache; facial pain; nasal congestion; fever; general malaise; thick green or yellow discharge; feeling of facial ‘fullness’ worsening on bending over.
Factors which may predispose to developing sinusitis include: allergies; structural problems such as a deviated nasal septum; smoking; nasal polyps; carrying the cystic fibrosis gene (research is still tentative).
More more allergy information at http://allergyandasthmatreatment.com
Popularity: unranked [?]
Curved Window window blinds
Curved Window window blinds
If curved custom blinds are desired, a radius of curvature may be given with the +/-r option. If given as +r, The curvature is upward (which is the usual configuration). If the option is given as -r, then the curvature is downward. The radius indicates how far from each slat its effective cylindrical center resides. Each slat will be broken into as many polygons as is necessary to keep the delta changes in angle less than 10 degrees. (Note that this may result in a rather large number of polygons.)
Popularity: unranked [?]
Company to Install and Deliver Mini window coverings
Company to Install and Deliver Mini window coverings
A window treatments Company will complete delivery and installation within 20 to 30 days after receipt of order.Contract Shading Systems will complete delivery and installation within 20 to 40 days after receipt of order. In the event the delivery is not received within the contract delivery period, the contractor maybe held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby. It is important that agencies make the contract administrator aware of any delivery or installation problems.
Popularity: unranked [?]
Easy Resumes
Easy Resumes
Modern technology has added a new twist to preparing resumes andcover letters. The availability of personal computers and laser printers has raised employers expectations of the quality of resumes andcover letters applicants produce. Electronic mail, Internet postings, and software that reads resumes help some employers sort and track hundreds of resumes. Technology has also given cover letter writers greater flexibility; page limits and formatting standards are no longer as rigid as they were several years ago. The only rule is that there are no rules, says Frank Fox, executive director of the Professional Association of Resume Writers. Resume should be error free no typos or spelling mistakes but beyond that, use any format that conveys the information well.
Popularity: unranked [?]
Invoicing for Mini Blind Installation
Invoicing for Mini Blind Installation
The contractor shall invoice at the actual installation cost of the discount blinds, per location.The minimum installation charge shall apply only in cases where the installation cost of the window blinds exceeds the minimum installation charge.
*Location is defined as one or more buildings within close proximity to one another requiring installation service. The minimum installation charge is not intended to apply to each building at a single location. When installation can be completed at more than one building, and it is not necessary for the installers equipment to be transported by vehicle between the installation sites, only one minimum installation charge should be applied.
Popularity: unranked [?]
Mini Blind Contract Responsiblities
Mini Blind Contract Responsiblities
It is the responsibility of the contractor to call on any state agency, institution, public school, university, or participating non-state agency to discuss requirements and upon written request, take and guarantee measurements. Contractor is obligated to respond to such requests. Contractors responding to telephone requests for measurements will do so at their own risk. The State will not be responsible for misunderstandings resulting from oral requests.
Popularity: unranked [?]
Mini Blind Installation Documentation
Mini Blind Installation Documentation
The contractor(s) shall provide a copy of all invoices and over per location and a copy of the floor layout to show room numbers and the number of windows with installation.
Invoices shall indicate:
a) Type of window coverings
b)Number of window treatments at each size
c)Square footage of each blind
d)Total number of window coverings
e)Total square footage
f)Quantity Discounts
g)Itemized Additional Charges
h)Installation Charge
i)Total Price
Such invoices shall be forwarded to the attention of
Quality Assurance Inspection.Invoices shall be sent on accumulative monthly basis.Failure of the contractor to comply with this requirement may result in the removal of the contractor from the contract.Upon acceptance by quality assurance inspection to determine compliance with specifications, terms and conditions of this contract, approval for payment of this invoice will be forwarded to the using agency.INVOICES WILL NOT BE PAID BY THE USING AGENCY UNTIL QUALITY ACCEPTANCE HAS BEEN APPROVED.
Popularity: unranked [?]
Mini Blind Contract Changes Definition
Mini Blind Contract Changes Definition
Contract changes, if any, over the life of the contract are implemented by contract addenda released by the Contract Administrator to the contractor. If the contractor is accepting orders and/or delivering through other parties, for example a manufacturer accepting orders and delivering through a dealer network or dealers receiving orders through a network of other dealers, then it is the responsibility of the contractor to apprise such parties of all such contract addenda.
Popularity: unranked [?]
What to do if Circumstances prevent Delivery?
What to do if Circumstances prevent Delivery?
If circumstances beyond the control of the contractor result in a late delivery and installation, it is the responsibility and obligation of the contractor to make the details known immediately to the contract administrator.
Term Contract No. 870A
Popularity: unranked [?]
Natural Remedies For High Blood Pressure
There’s been a big demand on how to lower blood pressure naturally. Natural alternatives seem to be increasing in popularity as time goes on. When looking for a natural high blood pressure treatment, it’s a good idea to talk to a doctor before going forward with your regimen. Also, sometimes it’s necessary to ask for another doctors opinion. Some may not recommend something, while another will. Imagine if you were stopped before trying something that could actually work for you. You see, there are many ways to lower high blood pressure, but not all doctors agree with a certain treatment. Consider your body chemistry and if you have any allergies…especially to certain herbs which may be contained in the product you choose to use. Click here to check out a great resource.
Popularity: unranked [?]
Mini Blind Measurement Dimensions
Mini Blind Measurement Dimensions
Width x Length (Width Is Always Listed First) If an outside mount is required, the Width of the window should be measured at the top, the middle, and the bottom, with the smallest measurement being the measurement recorded minus 1/4 inch to allow room for the brackets to be installed. The Length of the window should be taken on the right and the left sides, with the smallest measurement being the measurement recorded (do not deduct 1/4 inch from this measurement).
Width x Length (Width Is Always Listed First) For continuous curtain wall windows where outside mount is required, measure the Width from center line of window mullion to center line of window mullion, record this dimension. This should be treated as an inside measurement as stated above.
Call contractor if questions should arise prior to placing your order.
Term Contract No. 870A
Popularity: unranked [?]
North Carlolina General Contract Terms for window coverings Installation
North Carlolina General Contract Terms for window coverings Installation
The Dize Company will complete on-site measurements within 10 to 18 days after request from the user. Contract Shading Systems will complete on-site measurements within 10 to 20 days after request from the user. In the event the on site measuring is not completed within the contracted time period, the contractor may be held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby.
It is important that agencies make the contract administrator aware of any measurement problems.
Popularity: unranked [?]
Mini Blind contract custom blindsChanges Definition
Mini Blind contract custom blindsChanges Definition
Contract changes, if any, over the life of the contract are implemented by contract addenda released by the Contract Administrator to the contractor. If the contractor is accepting orders and/or delivering through other parties, for example a manufacturer accepting orders and delivering through a dealer network or dealers receiving orders through a network of other dealers, then it is the responsibility of the contractor to apprise such parties of all such contract addenda.
Popularity: unranked [?]
Job Match or “T”
Job Match or “T”
It’s always important to match your qualifications to the job and/or employer in the cover letter. This is generally done as part of the body of the letter. In the “T” letter format this is done as bullet points targeting the specific requirements and your corresponding qualifications. Some sources for information to help you match your qualifications include: employment advertisements, company websites, position descriptions, phone conversations with the employer and informational interviews.
Popularity: unranked [?]
Mini window treatments to be Furnished and Installed
Mini window treatments to be Furnished and Installed
If circumstances beyond the control of the contractor result in a late delivery, it is the responsibility and obligation of the contractor to make the details known immediately to the contract administrator. Delivery/Installation: This contract provides for window coverings to be furnished only or furnished and installed. In instances where furnish and install is requested, window treatments are to be delivered and installed within a guaranteed delivery and installation schedule.
Popularity: unranked [?]
Blind Shading Systems Delivery Timing
Blind Shading Systems Delivery Timing
Contract Shading Systems will complete delivery within 15 to 30 days after receipt of order.In the event the delivery is not received within the contract delivery period, the contractor may be held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby. It is important that agencies make the contract administrator aware of delivery problems.
Popularity: unranked [?]
Blind Measuring Requirements
Blind Measuring Requirements
In situations where the contractor will be installing window treatments and the agency needs assistance in performing measurements, it is the obligation of the contractor to take on-site measurements. Requests for on-site measurements should be forwarded to the contractor in writing, with the using agencys purchase order number, to be confirmed once the actual measurements are complete and the estimate finalized. A purchase order should result in all instances, unless the estimate exceeds budgetary allowances. Any abuse of this service by agencies should be reported to the contract administrator.
All requests for measurements should be made in written form by the using agency. The State will not be responsible for and misunderstandings that results from oral requests.
Popularity: unranked [?]
How to Measure for Blind INstallation
How to Measure for Blind INstallation
12. Measurements
For agency installation of Venetian window coverings, please follow the guidelines listed in paragraph 13 for taking measurements.
If installation is to be performed by the agency, measurements should be taken by the agency. It should not be necessary to have a contractor take measurements.
Popularity: unranked [?]
Window Treatment Inovations Funding
Window Treatment Inovations Funding
Among the projects selected for funding are:
Advanced Processing Technology of Electrochromic Windows: A process to develop new film patterning techniques for energy-saving smart windows. The process improves visible light transmission and reduces glare, while retaining a clear view and increasing thermal comfort. Also, encouraging innovation with window discount blinds and shades to help increase energy savings.
An Indirect Route for Ethanol Production: A process to develop fuel ethanol from renewable resources to achieve savings of 80 percent in energy consumption. The process helps U.S. farmers create a market for corn supplies and increases national energy security.
Manufacturing Ceramic Products from Fiberglass Waste: A low-cost energy method of completely transforming fiberglass waste into a dense ceramic product that can be used for window window blinds, shades, as well as other uses. The process could eliminate the need for disposal of 260,000 tons of fiberglass waste annually.
Near-Infrared (NIR) Veneer Strength Sensor for Forest Industry: Use of NIR sensors instead of ultra-sonic technology allows testing for veneer wood strength before drying. The NIR technology will improve process efficiency and reduce product waste, and is expected to save about $23,000 annually in energy costs.
The Force Modulator: A durable sheet metal technology for the steel industry that allows proper control of press forces during part forming.
Popularity: unranked [?]
Basic Parts of a Thank Youe
Basic Parts of a Thank Youe
* Statement of appreciation for the interview.
* Expression of interest in employment with a cover letter.
* Brief restatement of qualifications.
* Final “Thank You.”
* Date and time you’ll follow-up.
Popularity: unranked [?]
Sign Your Letter
Sign Your Letter
Consider signing the letter in blue ink. It implies the letter is original. The only other ink color to use is black. Never use any other color on the cover letter.
Popularity: unranked [?]
What are Exterior window blinds?
What are Exterior window blinds?
Exterior roller custom blinds are usually made of wood, steel, aluminum, or vinyl. They’re mounted above the window. Side channels guide them as they’re lowered and raised. When you lower these discount blinds completely, their slats meet and provide shade. If partially raised, the window blinds allow some air and daylight to enter through windows.
Popularity: unranked [?]
Mini Blind Color Selection
Mini Blind Color Selection
Colors will be chosen from standard color selection (minimum 25) and alabaster must be available.window blinds are to be delivered within 21 days ARP (less holidays). Orders are not to be held to meet a minimum order quantity. Orders of ten (10) or more custom blinds will be charged at one price and orders of nine (9) or less will be charged at separate price.No additional charge for hold downs for door installation.
Popularity: unranked [?]
New Venetian Blind Created
New Venetian Blind Created
RADIANCE is description of a set of new venetian window treatments. The depth of the window coverings (X dimension) is given first, followed by the width (Y dimension), followed by the height (Z dimension). The number of slats to place evenly within this height is given as nslats. The angle of the blind, where zero is perfectly horizontal and a positive angle tilts the positive X edge upwards, is given in degrees. The window treatments are initially situated so that the corner of the bottom blind isheight/nslats/2 above the XY plane, and all coordinates are positive.Each new slat is placed height/nslats above the previous one, until the top slat is at height - height/nslats/2 . The window coverings may of course be moved from this starting point with the xform(1) command.
Popularity: unranked [?]
Mini window blinds to be Furnished and Installed
Mini window blinds to be Furnished and Installed
If circumstances beyond the control of the contractor result in a late delivery, it is the responsibility and obligation of the contractor to make the details known immediately to the contract administrator. Delivery/Installation: This contract provides for custom blinds to be furnished only or furnished and installed. In instances where furnish and install is requested, discount blinds are to be delivered and installed within a guaranteed delivery and installation schedule.
Popularity: unranked [?]
North Carlolina General Contract Terms for custom blinds Installation
North Carlolina General Contract Terms for custom blinds Installation
The Dize Company will complete on-site measurements within 10 to 18 days after request from the user. Contract Shading Systems will complete on-site measurements within 10 to 20 days after request from the user. In the event the on site measuring is not completed within the contracted time period, the contractor may be held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby.
It is important that agencies make the contract administrator aware of any measurement problems.
Popularity: unranked [?]
Place Your Title Here
Place Your Title Here
Good resumes, applications, and cover letters broadcast your abilities. They tell employers how your qualifications match a jobs responsibilities. If these paper preliminaries are constructed well, you have a better chance of landing interviews and, eventually, a job.
Popularity: unranked [?]